Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Insert the hook of the rear wiper arm through the opening in the rear wiper blade.

Fig 1: Installing Rear Wiper Arm
Courtesy of GENERAL MOTORS CORP.
Position the rear wiper blade pivot in the inside radius of the rear wiper arm hook.
Press the rear wiper blade pivot into the rear wiper arm hook until the pivot locks into the hook.

Fig 2: Pressing Rear Wiper Blade Clip Button
Courtesy of GENERAL MOTORS CORP.