LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1300 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement (Hose Connector to Washer Nozzle) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer hose (3) to the vehicle and connect the hose to the following components:
    • The hose connector (2)
    • The washer nozzle (4)
  2. Reposition the hood insulator back to its original position. Secure the insulator with the 3 plastic retainers.
    Fig 1: Connecting Washer Hose To Washer Nozzle And Hose Connector
    G01433841Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals