LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1300 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement (Hose Connector to Washer Container) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer hose (1) to the vehicle and connect to the washer pump.
  2. Connect the washer hose (1) to the Y-shaped hose connector (2).
  3. Install the right front wheelhouse panel liner. Refer to WHEELHOUSE PANEL REPLACEMENT in Body Front End.
  4. Fill the washer solvent container with washer solvent, as necessary.
    Fig 1: Connecting Washer Hose From The Y-Shaped Hose Connector
    G01433839Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals