Removal & Installation
WARNING: This page is about a different car, the 2002 GMC Savana and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disconnect negative battery cable. Remove IPC trim plate. Tilt steering column to full down position. Remove 2 screws retaining IPC to instrument panel. Pull IPC away from instrument panel. Disconnect IPC electrical connector. To install, reverse removal procedure. Tighten IPC screws to specification. See TORQUE SPECIFICATIONS .