LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Steering Wheel And Steering Column) >> Overhaul >> Repair Procedures >> Inspection (Column Jacket)

Inspection (Column Jacket)

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2001 Pontiac Firebird, 2001 Pontiac Bonneville, 2001 Chevrolet Monte Carlo, 2001 Chevrolet Impala, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Remove lower bearing from bottom of column. Using COLUMN JACKET COLLAPSE MEASUREMENTS  table as a guide, measure distance between points on column jacket as specified in illustration. See Fig 1-Fig 3 . If distance measured is not as specified, replace column jacket.

COLUMN JACKET COLLAPSE MEASUREMENTS (1)

Application In. (mm)
"C" Body 4.7 (119)
"E" Bodies 5.0 (127)
"F" Body 12.8 (324)
"H" Body 4.4 (113)
"K" Bodies
DeVille 6.6 (167)
Seville 4.7 (119)
"Y" Body 15.9 (403)
(1) See appropriate illustration.
Fig 1: Measuring Column Jacket (Bonneville, Le Sabre & DeVille)
G00030577Courtesy of GENERAL MOTORS CORP.
Fig 2: Measuring Column Jacket (Camaro, Eldorado, Firebird, Seville & Park Avenue)
G00030574Courtesy of GENERAL MOTORS CORP.
Fig 3: Measuring Column Jacket (Corvette)
G00030576Courtesy of GENERAL MOTORS CORP.