LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Steering Wheel And Steering Column) >> Adjustments >> BTSI & Park Lock System >> Adjustment (Column Shift "C" & "H" Bodies)

Adjustment (Column Shift "C" & "H" Bodies)

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2001 Pontiac Firebird, 2001 Pontiac Bonneville, 2001 Chevrolet Monte Carlo, 2001 Chevrolet Impala, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn lock cylinder to OFF position (not LOCK position). Place shift lever in Neutral. Unlock shift cable adjuster at transaxle end of shift cable (pull button up) to release cable tension.
  2. Lock shift cable adjuster (push button down). Place shift lever in Park. Ensure shift indicator is adjusted. Recheck BTSI system. If system still does not operate as specified, go to next step.
  3. Remove interlock solenoid by prying actuator end fitting from shift lever stud and prying adjuster block from bracket. Remove retaining clip. Compress adjuster block to release, slide away from solenoid as far as possible. See Figure. With shift lever in Neutral, reinstall solenoid. Move shift lever to Park, BTSI solenoid actuator is now properly adjusted. Reinstall adjustment retaining clip.
  4. Recheck BTSI system. If system does not operate as specified, repeat previous step.
scientia non olet · About LEMON Manuals