LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1299 (Lighting Systems) >> Description and Operation >> Exterior Lighting Systems Description and Operation >> Stop Lamps & Center High-Mounted Stop Lamp >> Circuit Operation

Circuit Operation

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Voltage is applied continuously from the stop fuse to the stop lamp switch. Voltage is applied from the stop lamp switch to C4 cavity 5 of the Instrument Panel Junction Block when the brake pedal is pressed. Voltage flows through the Instrument Panel Junction Block, continuing through SP300 to the Center High Mounted Stop Lamp.

SP300 applies voltage to the following lamps:

scientia non olet · About LEMON Manuals