Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
.
- Install the gear shift guide bracket and the 2 bolts.
Tighten
Tighten the bolts to 16 N.m (12 lb ft).
- Install the gear shift guide case gasket.
- Install the gear shift guide case and the 4 bolts.
Tighten
Tighten the gear shift guide case bolts to 20 N.m (14 lb ft).
- Connect the shift cables.
- Install the air cleaner assembly.