LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement (AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front suspension crossmember. Refer to FRONT SUSPENSION CROSSMEMBER REPLACEMENT (FWD)  or FRONT SUSPENSION CROSSMEMBER REPLACEMENT (AWD)  .
  2. Remove the 2 nuts and the 2 stabilizer shaft links from the stabilizer shaft.
  3. Remove the 2 stabilizer shaft clamps.
  4. Remove the 2 stabilizer shaft insulators.
scientia non olet · About LEMON Manuals