LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1281 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Control Assembly Replacement (A/C Switch) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the A/C switch to the I/P center trim panel.
  2. Connect the A/C switch electrical connector.
  3. Install the I/P accessory center trim plate (1) to the I/P assembly. Ensure that the retaining clips are fully engaged.
Fig 1: Identifying Instrument Panel Accessory Trim Plate
G01545552Courtesy of GENERAL MOTORS CORP.