LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B0051: Deployment Commanded >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR diagnostic system check has been performed, go to next step. If SIR diagnostic system check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
  2. Turn ignition off. If air bags have deployed, go to step  5. If air bags have not deployed, go to next step.
  3. Inspect vehicle and undercarriage for signs of impact or collision. If no impact or collision has occurred, go to step  5. If no impact or collision has occurred, go to next step.
  4. Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM)  under REMOVAL & INSTALLATION. Go to step  6.
  5. Replace components and perform inspections as required following an accident. See POST-COLLISION INSPECTION . Go to next step.
  6. Reconnect all SIR components. Using scan tool, clear DTC's. Go to SIR DIAGNOSTIC SYSTEM CHECK .