LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Controls - Removal, Overhaul & Installation) >> Ignition Systems >> Crankshaft Position Sensor >> Removal (3.0L)

Removal (3.0L)

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Turn OFF the ignition. Disconnect Crankshaft Position (CKP) sensor harness connector. See Figure . Raise and support vehicle. Remove CKP sensor attachment bolt and remove sensor. Ensure "O" ring is removed.