Manifold Absolute Pressure Sensor (2.2L): Removal
WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect Intake Air Temperature (IAT) sensor connector. Loosen clamp at air cleaner assembly. Remove push-pin attachment from outlet resonator/duct assembly to support bracket. Loosen clamp at throttle body assembly. Disconnect the PCV fresh air vent hose at cam cover.
- Remove outlet resonator/duct assembly. Disconnect MAP sensor electrical connector. See Figure . Remove MAP sensor and the MAP sensor port seal if it is still retained in the intake manifold.