LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1268 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Rear Compartment Lid >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment.
  2. Disconnect the rear compartment lock cylinder electrical connector.
  3. Drill out the rivet from the rear compartment lock cylinder retainer.
  4. Use a small flat-bladed tool to remove the retainer from the rear compartment lock cylinder.
  5. Remove the rear compartment lock cylinder and gasket from the rear compartment lid.
    Fig 1: Removing Rear Compartment Lock Cylinder And Gasket From Rear Compartment Lid
    G01504565Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals