LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1267 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix and 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the front door weatherstrip from the pinchweld flange to expose the windshield pillar garnish molding.
  2. Pull on the windshield pillar garnish molding to disengage the retainer clips.
  3. Remove the windshield pillar garnish molding from the vehicle.
    Fig 1: Removing Windshield Pillar Garnish Molding From Vehicle
    G01504500Courtesy of GENERAL MOTORS CORP.