LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1266 (Seat System) >> Repair Instructions >> Seat Back Replacement - Rear (Folding) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT - REAR  .
  2. Remove the rear center seat belts. Refer to SEAT BELT SYSTEM in Seat Belts.
  3. Remove the nut (1) from the child rear seat latch bracket.
  4. Remove the bolts (2) from each end of the latch bracket.
    Fig 1: Removing Nut From Child Rear Seat Latch Bracket
    G01504433Courtesy of GENERAL MOTORS CORP.
  5. Fold the rear seat back cushions down.
  6. Remove the anchor bolts from the rear seat latches.
  7. Remove the rear seat latches from the rear seat back.
  8. Fold the rear seat back cushions up.
  9. Reposition the seat belts from the rear seat back.
  10. Remove the rear seat back from the vehicle.
    Fig 2: Removing Rear Seat Back From Vehicle
    G01504434Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals