LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1266 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Non Folding) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (STATIONARY)  or SEAT BACK REPLACEMENT - REAR (FOLDING)  .
  2. Remove the rear seat back pad. Refer to SEAT BACK PAD REPLACEMENT - REAR (FOLDING)  or SEAT BACK PAD REPLACEMENT - REAR (NON FOLDING)  .
  3. Remove the seat back pad frame.
    Fig 1: Removing Rear Seat Back Pad Frame
    G01504437Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals