LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1266 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Folding) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (STATIONARY)  or SEAT BACK REPLACEMENT - REAR (FOLDING)  .
  2. Remove the rear seat back bolsters. Refer to SEAT BACK BOLSTER REPLACEMENT - REAR SPLIT FOLDING  .
  3. Remove the rear seat fold down pivot bolts (1) from the seat back frame.
    Fig 1: Removing Rear Seat Fold Down Pivot Bolts From Seat Back Frame
    G01504439Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat backs from the frame.
    Fig 2: Removing Seat Backs From Frame
    G01504440Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals