LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1264 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Pull the hood rear weather-strip from the pinch-weld flange.
  3. Remove the hood rear weather-strip from the vehicle.
    Fig 1: Pulling Hood Rear Weather-Strip From Pinch-Weld Flange
    G01503999Courtesy of GENERAL MOTORS CORP.