LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Engine Controls - Removal, Overhaul & Installation - 6.5L Diesel) >> Air Induction Systems >> WASTEGATE Solenoid >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 GMC C3500 HD, and 2002 Chevrolet RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cables. On vans, remove engine cover. See ENGINE COVER . On all models, remove the harness connector from the wastegate solenoid by releasing the locking tab. Disconnect the vacuum hoses. Remove the solenoid mounting bolt. Remove the wastegate solenoid. To install, reverse removal procedure. Tighten fasteners properly. See TORQUE SPECIFICATIONS .