LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1244 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Timing Chain and Sprockets Removal (L36)

Timing Chain and Sprockets Removal (L36)

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the timing marks on the sprockets.
    Fig 1: Aligning Timing Marks (L36)
    G02083780Courtesy of GENERAL MOTORS CORP.
  2. Remove the timing chain dampener.
    Fig 2: Removing Timing Chain Dampener
    G02083781Courtesy of GENERAL MOTORS CORP.
  3. Remove the camshaft sprocket bolt.
  4. Remove the camshaft sprocket.
  5. Remove the timing chain.
  6. Remove the crankshaft sprocket.
  7. Remove the crankshaft balancer key.
    Fig 3: Removing Crankshaft Sprocket With Timing Chain
    G02083782Courtesy of GENERAL MOTORS CORP.
  8. Remove the balance shaft drive gear.
    Fig 4: Removing Balance Shaft Drive Gear
    G02083783Courtesy of GENERAL MOTORS CORP.