LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1243 (Engine Mechanical - 3.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the coolant recovery reservoir. Refer to COOLANT RECOVERY RESERVOIR REPLACEMENT in Engine Cooling.
  2. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT  .
  3. Remove the drive belt tensioner bolt.
  4. Remove the drive belt tensioner.
    Fig 1: Removing Drive Belt Tensioner
    G02081327Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals