LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Model Identification

Model Identification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle model is identified by fifth character (G) of Vehicle Identification Number (VIN). VIN is stamped on metal pad on top of left end of instrument panel, near windshield.

This article only covers removal, overhaul and installation procedures for gasoline components. Many of these components are also installed on bi-fuel vehicles. For removal, overhaul and installation procedures for alternate fuel systems and components on bi-fuel vehicles, see REMOVAL, OVERHAUL & INSTALLATION - CHEVY EXPRESS & SAVANA - BI-FUEL article. For vehicles equipped with diesel engines, see diesel removal, overhaul and installation article.

Engine size is identified by eighth character of Vehicle Identification Number (VIN). VIN is stamped on metal pad on top of left end of instrument panel, near windshield. See ENGINE IDENTIFICATION  table.

ENGINE IDENTIFICATION

VIN ID (1) Engine Size
"W" 4.3L
"M" 5.0L
"R" (2) 5.7L
"G" 8.1L
(1) Only gasoline engines are listed. For diesel engine, see REMOVAL, OVERHAUL & INSTALLATION - 6.5L DIESEL article.
(2) Indicates gasoline only and bi-fuel (gasoline/CNG) engine.