LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1224 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Rotating the Engine for Service Access

Rotating the Engine for Service Access

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 41131  Engine Tilt Strap

  1. Disconnect intake air temperature (IAT) sensor electrical connector.
  2. Remove the air inlet duct from the throttle body.
  3. Apply the parking brake.
  4. Put the transaxle in the Neutral position.
  5. Remove the engine mount struts. Refer to Engine Mount Strut Replacement - Right  and Engine Mount Strut Replacement - Left .
  6. Install the J 41131  to the right strut mount bracket and the upper radiator support.
  7. Rotate the engine forward for component access.
scientia non olet · About LEMON Manuals