Front Hoist Pads

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Vehicle Lifting - Front Hoist Pads

Courtesy of GENERAL MOTORS CORP.

Important: The front hoist pads must not contact the rocker panels, the front fenders, or the floor pan.

Position the (frame contact) front hoist pads as follows:

Under or immediately forward of the front frame rail shipping slot reinforcements.
The long sides of the hoist pads parallel to the frame rails.