Rotating the Engine for Service Access
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
J 41131 Engine Tilt Strap
- Remove the throttle body air inlet duct. Refer to AIR CLEANER INTAKE DUCT .
- Apply the parking brake.
- Put the transaxle in the Neutral position.
- Remove the engine mount strut bolts. Swing the engine mount struts aside. Refer to Engine Mount Strut Replacement .
- Install the J 41131 .
- Rotate the engine forward for component access.