LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Engine Controls Removal & Installation) >> Ignition Systems >> Camshaft Position Sensor >> Removal & Installation (2.2L - VIN F)

Removal & Installation (2.2L - VIN F)

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This ignition system does not use a conventional Camshaft Position (CMP) sensor. The Ignition Control Module (ICM) detects when cylinder No. 1 or 3 has fired on its compression stroke using sensing circuitry integrated within each ignition coil.