LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Engine Controls Removal & Installation) >> Fuel Systems (Gasoline Engines) >> Intake Air Temperature Sensor >> Removal & Installation (2.2L - VIN 4 & 2.4L)

Removal & Installation (2.2L - VIN 4 & 2.4L)

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

IAT sensor is located on the side of the air cleaner outlet duct. Turn ignition off. Disconnect negative battery cable. Disconnect the IAT sensor harness connector. Carefully remove the IAT sensor from air cleaner outlet duct. To install, reverse removal procedure.