LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1214 (Body Rear End) >> Repair Instructions >> Strut Replacement - Rear Compartment Lid >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the strut onto the lower ball stud.
  2. Snap the strut onto the upper ball stud.
  3. Close the lid.
    Fig 1: Rear Compartment Lid Strut
    G01452047Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals