LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1214 (Body Rear End) >> Repair Instructions >> Rear Compartment Lid Switch Replacement (Domestic) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the rear compartment lid release switch.
  2. Install the switch.

    Align the switch to the opening in the trim panel, then push to secure.

    Fig 1: Rear Compartment Lid Switch
    G01451975Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals