LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1214 (Body Rear End) >> Repair Instructions >> Brake Caliper Cooling Duct Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  3. Remove the wheelhouse panel. Refer to WHEELHOUSE PANEL REPLACEMENT  . 
  4. Remove the brake caliper cooling duct.
    Fig 1: Brake Caliper Cooling Duct
    G01452071Courtesy of GENERAL MOTORS CORP.
  5. Remove the 4 brake caliper cooling air scoop nuts.
    Fig 2: Brake Caliper Cooling Air Scoop Nuts
    G01452072Courtesy of GENERAL MOTORS CORP.
  6. Remove the brake caliper cooling air scoop.
    Fig 3: Brake Caliper Cooling Air Scoop
    G01452073Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals