LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Interior Trim) >> Repair Instructions >> Windshield Side Garnish Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Grasp the windshield side garnish molding with your hands.
  2. Pull the molding with its retainers from the windshield frame.
    Fig 1: Pulling Molding With Retainers From Windshield Frame
    G01451926Courtesy of GENERAL MOTORS CORP.