LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Interior Trim) >> Repair Instructions >> Molding Replacement - Rear Window Lower >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right and left push pins securing the outer ends of the garnish molding.
  2. Pull the garnish molding with retainers from the roof panel.
    Fig 1: Pulling Garnish Molding With Retainers From Roof Panel
    G01451928Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals