LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Interior Trim) >> Repair Instructions >> Headliner Replacement - Roof Lift Off Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.
  1. Remove the protective covering from the adhesive on the headliner contact areas.
  2. Install the headliner to the roof lift-off panel.
    1. Place the forward edge of the headliner against the forward frame of the roof.
    2. Press firmly on the adhesive contact areas to engage the adhesive.
    3. Using a spatula, tuck the headliner between the roof panel and the roof frame.
      Fig 1: Headliner & Roof Panel
      G01451903Courtesy of GENERAL MOTORS CORP.
  3. Install the roof lift-off panel.
    Fig 2: Roof Lift-Off Panel
    G01451904Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals