LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Folding Top System) >> Repair Instructions >> Roof Lift Off Panel Front Latch Handle Striker >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the roof panel.
    Fig 1: Roof Panel
    G01451552Courtesy of GENERAL MOTORS CORP.
  2. Remove the sunshade. Refer to SUNSHADE REPLACEMENT in Interior Trim.
  3. Remove the side and upper garnish moldings. Refer to WINDSHIELD UPPER GARNISH MOLDING REPLACEMENT in Interior Trim.
    Fig 2: Side & Upper Garnish Moldings
    G01451553Courtesy of GENERAL MOTORS CORP.
  4. Mark the location of the striker to aid in installation.
  5. Remove the bolts attaching the striker.
  6. Remove the striker.
    Fig 3: Bolts Attaching Striker
    G01451554Courtesy of GENERAL MOTORS CORP.