LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Folding Top System) >> Repair Instructions >> Folding Top Glare Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rivet the glare cover to the #5 bow.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the glare cover screws to the #5 bow.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  3. Install the screws attaching the elastic straps to the #5 bow.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  4. Close the stowage lid and latch the top.
    Fig 1: Glare Cover To #5 Bow
    G01451487Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals