LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Door System, Mirror System & Window System) >> Repair Instructions >> Weatherstrip Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push-pin retainers from the ends of the weatherstrip.
  2. Pull the weatherstrip from the full length of the door.
  3. Remove any weatherstrip retainers that remain in the door. The new weatherstrip comes with retainers.
    Fig 1: Removing Push-Pin Retainers From Ends Of Weatherstrip
    G01451293Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals