LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Outer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to TRIM PANEL REPLACEMENT - DOOR .
    Fig 1: Door Trim Panel
    G01451289Courtesy of GENERAL MOTORS CORP.
  2. Remove the screw from the front of the sealing strip.
  3. Slide the strip rearward.
  4. Pull the sealing strip retainers from the holes in the door.
    Fig 2: Sealing Strip Retainers From Holes In Door
    G01451290Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals