LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Door System, Mirror System & Window System) >> Repair Instructions >> Energy Absorber Pad Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to TRIM PANEL REPLACEMENT - DOOR .
  2. Remove the door energy absorber. Heat will aid in removal.
    Fig 1: Door Energy Absorber
    G01451149Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals