Body Panel Adjustment

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The rear tip of the front fender is adjusted outward by installing a retainer (shim) GM P/N 10412533 to the door flange.

Open the door.
Install a retainer (shim), GM P/N 10412533, to the leaning edge of the door flange.
Close the door and check the alignment.

Fig 1: Retainer (Shim)
Courtesy of GENERAL MOTORS CORP.