LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1208 (Bumper System) >> Repair Instructions >> License Bracket Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the license plate frame.
  2. Remove the license plate screws.
  3. Remove the license plate.
  4. Remove the license plate bracket screws.
  5. Partially remove the license bracket to expose the back-up lamp sockets.
  6. Remove the back-up lamp sockets.
  7. Remove the license bracket.
Fig 1: License Bracket
G01450929Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals