LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1208 (Bumper System) >> Repair Instructions >> Fascia Retainer Replacement - Front Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the retainer to the upper bracket.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the front fascia retainer to bracket bolts.

    Tighten 

    Tighten the front fascia retainer bolts to 7 N.m (62 lb in).

  3. Install the front fascia. Refer to FASCIA REPLACEMENT - FRONT BUMPER  . 
Fig 1: Front Bumper Fascia Retainer
G01450922Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals