LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1208 (Bumper System) >> Repair Instructions >> Energy Absorber Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear fascia. Refer to FASCIA REPLACEMENT - REAR BUMPER  . 
  2. Remove energy absorber to impact bar bolts and spacers.
  3. Remove the energy absorber.
    Fig 1: Rear Energy Absorber
    G01450954Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals