Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Remove the windshield weatherstrip side retainer. Refer to WEATHERSTRIP SIDE RETAINER REPLACEMENT (COUPE AND CONVERTIBLE) or WEATHERSTRIP SIDE RETAINER REPLACEMENT (HARDTOP) .

Fig 1: Windshield Weatherstrip Side Retainer
Courtesy of GENERAL MOTORS CORP.
Remove the windshield side reveal molding screws.
Peel away the reveal molding with the applique from the windshield frame.

Fig 2: Windshield Side Reveal Molding
Courtesy of GENERAL MOTORS CORP.
Remove the applique from the reveal molding.
Clean all surfaces.

Fig 3: Removing Applique From Reveal Molding
Courtesy of GENERAL MOTORS CORP.