Removal Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the electrical connector (1) from the back of the inside rearview mirror.
Courtesy of GENERAL MOTORS CORP.
Important: Do NOT pull rearward on the mirror while removing the mirror or damage to the support and/or windshield will occur.
- Rock the mirror from side to side pushing upward firmly.
An audible click is heard when the inside rearview mirror is releasing from the support.
- Remove the inside rearview mirror support.