Engine Oil Pressure Gage
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
The IPC displays the engine oil pressure as determined by the PCM. The IPC receives a class 2 message from the PCM indicating the engine oil pressure. The engine oil pressure gage defaults to 0 kPa (0 psi) or below if:
- The PCM detects a malfunction in the engine oil pressure sensor circuit.
- The IPC will display the low oil pressure message on the DIC.
- The check gages indicator turns on.