Fasten Safety Belt Warning

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The IPC activates the fasten safety belt audible warning as requested by the IPC. The IPC receives a low input signal from the seat belt switch for 8 seconds. The fasten safety belt warning sounds and the fasten safety belt indicator illuminates when the following occurs:

The ignition switch transitions to ON.
The IPC detects that the driver's seat belt is not buckled (signal is low).

If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.