LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Body Control System) >> Diagnostic Information and Procedures >> DTC B0605: Stored Checksum Does Not Match Calculated Checksum >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The control module calibrations are stored in the EEPROM when the ignition switch is turned OFF. When the ignition is first turned ON, the control module performs internal tests on the EEPROM to determine the integrity of this non-volatile memory. The control module compares its previously stored checksum with the checksum calculated when the ignition is first turned ON. If the two checksums do not match, the control module will indicate a calibration malfunction (checksum error) is current and set this DTC.

scientia non olet · About LEMON Manuals