LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Controls - Removal, Overhaul & Installation - Except Diesel) >> Emission Systems & Sub-Systems >> EVAP Canister Vent Valve >> Removal

EVAP Canister Vent Valve: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove fuel tank as necessary. See FUEL TANK  under FUEL SYSTEMS. Remove EVAP canister vent valve bracket mounting bolt. See Figure or Figure .
  2. Disconnect EVAP canister vent valve harness connector. Disconnect EVAP canister vent pipe from EVAP canister vent valve. Remove EVAP canister vent valve from bracket.
scientia non olet · About LEMON Manuals