LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Controls - Removal, Overhaul & Installation - Except Diesel) >> Emission Systems & Sub-Systems >> EVAP Canister Purge Solenoid >> Removal (4.3L)

Removal (4.3L)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect EVAP purge pipe from EVAP canister purge solenoid, located on top right center of engine. See Figure. Disconnect EVAP canister purge solenoid harness connector.
  2. Remove EVAP canister purge solenoid retaining nuts. Remove engine wiring harness bracket from EVAP canister purge solenoid mounting stud. Remove EVAP canister purge solenoid.
scientia non olet · About LEMON Manuals